(800) 373-2873
Reduce Falls Red Heart Logo Reduce Infections Red Heart Logo Reduce Costs

Wireless® Patient Monitoring System

 

The patented Secure® Wireless Patient Monitoring System. It takes fall management alarm monitors to the next level by eliminating tripping hazards, removing the fall alarm monitor sound from the patient room, and employing the most advanced, continuous 2.4G patented bi-directional wireless communication which minimizes interference within a facility and ensures secure, instantaneous communication between components. Competitive wireless 433MHz bandwidth is a much more overcrowded bandwidth prone to interference. Upgrade to the highest quality, most cost effective wireless fall management monitoring system available today! U.S. Patent No. 9,466,204.

Wireless Patient Monitoring System Components
Sync up to three transmitters with one alarm monitor

 

  • Flexible Set-Up – Mount the fall alarm monitor away from the patient or resident in a variety of locations to maximize safety, eliminate tripping hazards, and reduce the “nuisance alarms” that are so prevalent in healthcare facilities today. Alarm monitor may be mounted or placed outside of patient room up to 150 ft. away from the transmitter for a quieter in-room environment.
  • Reduce “Fall Alarm Monitor Fatigue”– Fall alarm monitor can be mounted with wall mount (included) next to and connected to a facility’s existing nurse call system with alarm monitor sound set to mute, eliminating in-room alarm sound and alerting the nurse’s station when unsafe ambulation occurs (requires optional NCI-1 Nurse Call Interface Cable).
  • Wire•Less® Bi-Directional Technology (patented) – When triggered, the transmitter instantly sends wireless signal to fall alarm monitor without the dangerous delay found in many other patient fall alarm monitors. The fall alarm monitor then sends a confirmation signal to the transmitter to stop the transmitter signal, effectively conserving battery life.
  • Multiple Applications – In addition to Wire•Less® bed and chair sensor pads, the Wire•Less® fall alarm monitor and transmitter can be paired with all Secure® bed/chair/toilet sensor pads, floor mats, and alarming wheelchair seat belt. Simply insert the transmitter in our AMH-1 holder and connect to any of the aforementioned Secure® monitoring pads, mats and seat belt. Make the switch to Wire•Less® without having to purchase new sensor pads!
  • Auto Reset – Fall alarm monitor automatically resets once the patient gets back on the bed/chair sensor pad. Alternatively, the fall alarm monitor can be reset by pressing the reset button located on the front of the fall alarm monitor. When using a floor mat sensor, the fall alarm monitor will continue to sound until the reset button is pressed.
  • Wireless Patient Monitoring System UsageSecure Connection – Fall alarm monitor and transmitter communicate every 5 minutes to confirm both remain safely synced. If the alarm monitor and transmitter become unpaired the fall alarm monitor light will flash and the fall alarm monitor will sound continuously indicating the system is not functioning properly.
  • Low Battery Indicators – Both fall alarm monitor and transmitter feature low battery indicators which alert staff and caregivers when new batteries must be installed. Batteries are included with both the fall alarm monitor and transmitter.
  • Wire•Less® Sensor Pads – Ultra-thin Wire•Less® bed & chair sensor pads are antimicrobial, latex-free, incontinent proof, and can be folded for storage.
  • Removable Wire•Less® Transmitter – Our unique Removable Wire•Less® Transmitter can be removed and interchanged with our Wire•Less® Bed or Chair pad. Competitive wireless transmitters are sealed into the pads and cannot be removed.
  • 3x AA batteries included with the WAM-1 and 2x AAA with the WAT-1.
  • All components are covered by a one year warranty against defects and workmanship.
  • U.S. Patent No. 9,466,204